欢迎进入铭奋电子科技官网 - 专业销售半导体封装材料及提供工艺设计和解决方案

Products

产品中心

产品中心

相关文件

暂时没有内容信息显示
请先在网站后台添加数据记录。

产品名称Thermoset SC-309

所属分类洛德灌封材料
概要信息
LORD Thermoset SC-309导热型有机硅灌封胶是一种两组份体系,可满足电气/电子封装领域对高导热性的要求,同时又能保持有机硅的理想特性,可在室温下固化,也可高温固化以最大限度提高粘合力。
产品描述

LORD Thermoset SC-309导热型有机硅灌封胶是一种两组份体系,可满足电气/电子封装领域对高导热性的要求,同时又能保持有机硅的理想特性,可在室温下固化,也可高温固化以最大限度提高粘合力。

Description

LORD Thermoset SC-309 thermally conductive silicone encapsulant is a two-component system designed to provide excellent thermal conductivity for electrical/electronic encapsulating applications, while retaining desirable properties associated with silicones. Thermoset SC-309 encapsulant can be either room temperature cured or heat cured for maximum adhesion.

Features and Benefits

Low Stress – exhibits low shrinkage and stress on components as it cures.

Durable – composed of an addition-curing polydimethyl siloxane polymer that will not depolymerize when heated in confi ned spaces.

Low Viscosity – maintains low viscosity for ease of component encapsulation compared to other highly thermal conductive materials.

Environmentally Resistant – provides excellent thermal shock resistance.

UL Rated – provides excellent fl ame retardancy; UL 94 V-O certifi ed.

Application

Mixing – Thoroughly stir each component prior to mixing together. Mix Thermoset SC-309 resin with Thermoset SC-309 hardener at a 1:1 ratio, by weight or volume. Automatic meter/mix/dispense equipment may be used for high volume production.

Unless a closed-chamber mechanical mixer is used, air will be introduced into the encapsulant system either during mixing or when catalyzing the mixture. Electrical properties of the silicone encapsulant are best when air bubbles and voids are minimized. Therefore, in extremely high voltage or other critical applications, vacuuming may be appropriate.

Applying – Apply silicone encapsulant using automatic meter/mix/dispense equipment.

Avoid applying Thermoset SC-309 encapsulant to surfaces that contain cure inhibiting ingredients, such as amines, sulfur or tin salts. If bonding surface is in question, apply a test patch of Thermoset SC-309 encapsulant to the surface and allow it to set for the normal cure time.

Typical Properties*

  SC-309 Resin SC-309 Hardener Mixed
Appearance Gray Liquid White Liquid Light Gray Liquid
Viscosity, cps @ 25°C 3500 3500 3600
Specifi c Gravity 1.66 1.66 1.66
Gel Time, min @ 50°C - - 5-9
Working Life, min @ 25°C - - 30

Typical Cured Properties**

Curing – Allow encapsulant to cure for 24 hours at room temperature (25°C), for 15 minutes at 100°C, or for 10 minutes at 120°C. This time-at-temperature profi le refers to the time the material should be allowed to cure once it reaches the target temperature. Allowance should be made for oven ramp rates, parts with large thermal mass and other circumstances that may delay material actually reaching the target temperature.

Shelf Life/Storage

Shelf life of each component is six months from date of manufacture when stored at 25°C in original, unopened container. The material must be periodically rotated within its container to maintain maximum shelf life. Settling will occur if not mixed.

Thermoset SC-309 encapsulant evolves minute quantities of hydrogen gas. Do not repackage or store material in unvented containers. Adequately ventilate work area to prevent the accumulation of gas.

Cautionary Information

Before using this or any LORD product, refer to the Material Safety Data Sheet (MSDS) and label for safe use and handling instructions.

For industrial/commercial use only. Must be applied by trained personnel only. Not to be used in household applications. Not for consumer use.

 

一分快三官网_一分快三开奖结果 简阳市 | 普安县 | 宜良县 | 睢宁县 | 西丰县 | 洞口县 | 玉田县 | 江安县 | 通河县 | 伊春市 | 无为县 | 格尔木市 | 岢岚县 | 盐源县 | 辉县市 | 济阳县 | 平武县 | 内江市 | 彝良县 | 营山县 | 虎林市 | 肥乡县 | 贡嘎县 | 偏关县 | 崇明县 | 韶关市 | 东台市 | 环江 | 剑阁县 | 石嘴山市 | 和林格尔县 | 麟游县 |